Raspberry PI

Pi Box for the Raspberry Pi

The Raspberry Pi is everybody’s favorite little computer, the last thing that you’d want is for something bad to happen to it. Why not protect it with one of these snazzy plastic enclosures? These cases protect the Raspberry Pi from things like rogue wires that might short it out while still allowing full access to the board! Simply snap the RPi into the bottom half of the enclosure, then snap the two sides together.
The enclosure provides slots to access the peripheral header, USB ports, Ethernet, SD card, HMDI, composite video, audio, CSI and JTAG connectors as well as feet and vents to ensure the board gets proper cooling. All of the status LEDs on the Pi are visible through the case.

Descripción adicionalMás Detalles

Dimensions

9.5×6.2×3.2cm. Box need your to assemble, but very simple, and then tear off the plastic protective film on the surface.

Precio: $15.28

Loading Actualizando Carro…

Pi Cobbler Breakout Kit for Raspberry Pi from Adafruit

Now that you’ve finally got your hands on a Raspberry Pi® , you’re probably itching to make some fun embedded computer projects with it. What you need is an add on prototyping Pi Cobbler from Adafruit, which can break out all those tasty power, GPIO, I2C and SPI pins from the 26 pin header onto a solderless breadboard. This mini kit will make «cobbling together» prototypes with the Pi super easy. Designed for Raspberry Pi Model B Revision 1.0.

This Cobbler is in a compact shape, which is the least bulky way to wire up. We also have the fancier T-Cobbler.

Descripción adicionalMás Detalles

The Pi Cobbler mini kit comes with a 26 pin ribbon cable, a custom PCB, ribbon cable socket and header pins. A little soldering is required to put it together but its really easy, even a beginner can do it in 15 minutes so please click to read the tutorial Once soldered together, the cable plugs between the Pi computer and the Cobbler breakout. The Cobbler can plug into any solderless breadboard (or even a prototyping board like the PermaProto). The Cobbler PCB has all the pins labeled nicely so you can go forth and build circuits without keeping a pin-out printout at your desk. We think this will make it more fun to expand the Pi and build custom circuitry with it.

The Adafruit Pi Cobbler is compatible with both versions 1 and 2 of the Raspberry Pi Computer – for version 2 computers, note that the GPIO #21 has been replaced with GPIO #27 and that the I2C pins are now I2C port #1 instead of #0. All other pins are the same.

Please note, this kit only contains a 26 pin ribbon cable, a custom PCB, ribbon cable socket and header pins. A Raspberry Pi, breadboard, breadboarding wires, cables, components, case, power supply, etc is not included! We do stock many of those items in the shop, so check those out as well!

Precio: $17.95

Loading Actualizando Carro…

Raspberry Pi Camera Board 5MP, 1080p

La cámara Raspberry Pi Board se conecta directamente al conector de CSI en el Raspberry Pi. Es capaz de ofrecer una imagen cristalina 5MP de resolución, o la grabación de vídeo HD 1080p a 30 fps!

Diseñado y fabricado por la Fundación Raspberry Pi en el Reino Unido, la Cámara Raspberry Pi Board cuenta con un sensor de 5MP (2592 × 1944 píxeles) Omnivisión sensor 5647 con módulo de enfoque fijo. El módulo se conecta a Raspberry Pi, a través de un cable plano de 15 pines, al conector dedicado de 15 pines MIPI Cámara Interface serie (CSI), que fue diseñado especialmente para la conexión a las cámaras. El bus CSI es capaz de tasas de transferencia de datos extremadamente altas y se utiliza exclusivamente para pasar los datos de píxeles al procesador BCM2835.


Leer el resto de este artículo »

Descripción adicionalMás Detalles

La placa en sí es muy pequeña, alrededor de 25 mm x 20 mm x 9 mm, y con un peso de poco más de 3 g, por lo que es perfecto para móviles u otras aplicaciones donde el tamaño y el peso son importantes. El propio sensor tiene una resolución nativa de 5 megapíxeles y tiene una lente de foco fijo a bordo. En cuanto a las imágenes fijas, la cámara es capaz de llegar a 2592 x 1944 píxeles de imágenes estáticas, y también es compatible con 1080p @30fps, 720p @60fps y 640x480p 60/90 de grabación de vídeo.

La cámara es compatible con la última versión del Raspbian, el sistema operativo preferido por el Raspberry Pi.

The Raspberry Pi Camera Board Features:

  • Fully Compatible with Both the Model A and Model B Raspberry Pi
  • 5MP Omnivision 5647 Camera Module
  • Still Picture Resolution: 2592 x 1944
  • Video: Supports 1080p @30fps, 720p @60fps  and 640x480p 60/90 Recording
  • 15-pin MIPI Camera Serial Interface – Plugs Directly into the Raspberry Pi Board
  • Size: 20 x 25 x 9mm
  • Weight 3g

Tutorials

Installation Tutorial

Taking Pictures – RaspiStill Command List

Taking Video – RaspiVid Command List

Downloads

Detailed Camera Documentation

OVA5647 Spec. Sheet

Precio: $55.46

Loading Actualizando Carro…

Raspberry Pi Model B 512MB RAM

The Raspberry Pi® is a single-board computer developed in the UK by the Raspberry Pi Foundation with the intention of stimulating the teaching of basic computer science in schools. The Raspberry Pi is a credit-card sized computer that plugs into your TV and a keyboard. It’s a capable little PC which can be used for many of the things that your desktop PC does, like spreadsheets, word-processing and games. It also plays high-definition video. The design is based around a Broadcom BCM2835 SoC, which includes an ARM1176JZF-S 700 MHz processor, VideoCore IV GPU, and 256 or 512 Megabytes of RAM. The design does not include a built-in hard disk or solid-state drive, instead relying on an SD card for booting and long-term storage. This board is intended to run Linux kernel based operating systems.

Descripción adicionalMás Detalles

This is the Raspberry Pi Model B 512MB RAM model with two USB ports and a 10/100 Ethernet controller. Please note some boards are made in the UK, some in China. WE DO NOT KNOW IN ADVANCE WHICH ONES YOU MAY RECEIVE!
As typical of modern computers, generic USB keyboards and mice are compatible with the Raspberry Pi. The Raspberry Pi use Linux-kernel based operating systems. The Raspberry Pi does not come with a real-time clock, so an OS must use a network time server, or ask the user for time information at boot time to get access to time and date info for file time and date stamping. However a real time clock (such as the DS1307) with battery backup can be easily added via the I2C interface.

Guía de inicio rápido primeros_pasos
Descarga el Sistema Operativo
Manual para instalar el S.O. en una tarjeta SD
Más información, manuales y FAQ en www.raspberrypi.org
Raspberry Pi® is a trademark of the Raspberry Pi Foundation.

Precio: $81.68

Loading Actualizando Carro…